1) Engineering ratio 2) Kitchen appliance on the go
Found on
https://www.crosswordclues.com/clue/dynamic-range
(from the article `compact disc`) The number of bits determines the maximum attainable dynamic range. Dynamic range is the ratio of the loudest undistorted sound to the quietest ... The ear has an enormous range of response, both in frequency and in intensity. The frequency range of human hearing extends over three orders of ... The ...
Found on
http://www.britannica.com/eb/a-z/d/87
quotient of the signal from the maximum measurable indication of a quantity by the signal from the minimum measurable value of that quantity NOTE - In some cases the dynamic range may be expressed as an interval of the above-mentioned corresponding values.
Found on
http://www.electropedia.org/iev/iev.nsf/display?openform&ievref=394-40-17
the difference, over a given period of time, between maximum and minimum signal levels, expressed in decibels NOTE - The minimum signal level must be greater than a specified usable signal level.
Found on
http://www.electropedia.org/iev/iev.nsf/display?openform&ievref=702-04-23
the difference at a given point of the transmission chain over a given period of time between the maximum and minimum usable levels of a sound signal, expressed in decibels
Found on
http://www.electropedia.org/iev/iev.nsf/display?openform&ievref=723-03-11
the difference between the maximum and minimum sound signal levels that can be conveyed by a piece of equipment or a sound channel, expressed in decibels, between specified limits determined by the onset of non-linearity distortion at the upper extreme, and by an inadequate signal to noise ratio at the lower extreme
Found on
http://www.electropedia.org/iev/iev.nsf/display?openform&ievref=723-03-12
range between the maximum illuminance level causing neither blooming nor smearing, and the illuminance level corresponding to the minimum signal level limited by the noise in the luminance signal
Found on
http://www.electropedia.org/iev/iev.nsf/display?openform&ievref=808-02-06
Dynamic range describes the ratio of the softest sound to the loudest sound in a musical instrument or piece of electronic equipment. This ratio is measured in decibels (abbreviated as dB) units. Dynamic range measurements are used in audio equipment to indicate a component's maximum output signal and to rate a system's noise floor. As a reference ...
Found on
http://www.encyclo.co.uk/local/20171
<microscopy> In video and other electronic equipment and in photographic emulsions, the ratio of the maximum to minimum signal levels that introduce no more than acceptable levels of signal amplitude distortions. ... (05 Aug 1998) ...
Found on
http://www.encyclo.co.uk/local/20973
The difference between the lowest and the highest levels; in audio, it's often expressed in decibels. In video, it's listed as the contrast ratio.
Found on
http://www.encyclo.co.uk/local/21058
The ability of the camera's CCD to capture a full range of shadows and highlights.
Found on
http://www.encyclo.co.uk/local/21469
1. The number of decibels between the levels of the loudest and softest sounds that can be made by an instrument, or between the loudest and softest passages in a live or recorded piece. 2. In a tape recorder, or with respect to a specific type of recording tape, the decible level difference between its inherent noise level and the signal level at ...
Found on
http://www.encyclo.co.uk/local/22286
In opto-electronics, the maximum operating power range expressed in dB.
Found on
http://www.encyclo.co.uk/visitor-contributions.php
The difference in decibels between the loudest and quietest portions of audio. (Sound)
Found on
http://www.filmland.com/glossary/Dictionary.html#A
The dynamic range is ratio of the maximum measurable signal before saturation to the minimum measurable signal above the noise. Typically the dynamic range is expressed in either decades (powers of 10) or bits (power of 2). A 5 decade dynamic range indicates that there is a factor of 100,000 between the maximum and minimum signals measurable with t...
Found on
http://www.intl-lighttech.com/support/glossary
In radio terms, dynamic range is a measure of the strongest received signal that a receiver can handle with overloading or distortion. It is measured in decibels. A minimum satisfactory measurement is 70 dB; over 100 dB is preferred.
Found on
http://www.probertencyclopaedia.com/browse/GD.HTM
The ability of a scanner to register a wide range of tonal values--something from near white to near black. A scanner with good dynamic range is able to map input shades correctly to output shades, making images look brighter and giving them more visible detail. Generally the number of bits determines the maximum dynamic range.
Found on
http://www.rodsmith.org.uk/photographic%20glossary/rods%20photographic%20gl
Measure of a camera`s or camcorder`s ability to capture extremes of shadow (lowlights) and brightness (highlights) in the same scene.
Found on
http://www.sony.co.uk/glossary/ShowGlossary.action?site=odw_en_GB§ionty
The difference in signal level between the loudest and quietest parts of a programme, expressed in decibels. Difference in signal level between the loudest and quietest parts of a performance / recording etc. It is measured in decibels. Incidentally, the dynamic range of the human ear is said to be @ 130 dB. The range of the softest to the loudest ...
Found on
http://www.traditionalmusic.co.uk/music%20tech%20glossary/Music%20Tech%20Gl
Abbreviated as DR or DNR, dynamic range refers to the ratio (expressed in decibels) between the minimum and maximum perceptible values of a given quantity, specifically in acoustic and optical frequencies
Found on
http://www.used-line.com/glossaries/glossary.cfm?g_id=11
Dynamic range is the measurement of the highest and lowest signal voltage or power being transmitted through a network. It can be expressed as the difference between the two or as a ratio
Found on
http://www.used-line.com/glossaries/glossary.cfm?g_id=14
Dynamic range, commonly abbreviated as DR or DNR, refers to the ratio of a designated maximum level of a predetermined parameter (such as sound or light) to the minimum perceptible level of the same parameter. It can also be described as the ratio between the largest and smallest values within a given variable range
Found on
http://www.used-line.com/glossaries/glossary.cfm?g_id=28
The difference between the smallest amount and the largest amount that a system can process.
Found on
http://www.zoo.co.uk/~z0001325/Glossary.html
A measure of the detection range of a detector. The ratio of the largest to smallest detectable signal.
Found on
https://www.encyclo.co.uk/local/21539
A range of sounds from soft to loud. A measurement of the limits of microphones, recording and playb
Found on
https://www.encyclo.co.uk/local/22375
No exact match found.
